Book Nipping Press - Hydraulic Pressure - Book Nipping Press - Hydraulic Pressure Exporter, Manufacturer & Supplier, Amritsar, India

<< Previous Book Nipping Press - Hydraulic Pressure

Product Code : 17

Product Specification

Book Nipping Press - Hydraulic Pressure

SOME FEATURES

Every body who tries their hands in bookbinding wants a real Book Nipping Press Hydraulic Pressure. There are many styles of book press that one can use but there are certain technical requirements that make some presses better than others. Basically a press used in bookbinding process consists of a press screw which moves a floating platen up and down against a fixed platen.The platen faces screw to distribute the pressure from bottom point of contact with the press screw.
The same principal of pressing is used in this new Book Nipping Press Hydraulic Pressure with most latest technology of Hydraulic and electronics with best mechanical operation.
Thread Sewn Book Blocks being prepared for hard case or soft cover binding need the NIPPING process of reducing or knocking out the SWELL in the spine,which is reduced by clamping the book block by hydraulically pressed plates & the spine is pressed by hydraulic pressure also which is controlled by PLC (Programmable Logic Control) that can be set to desired results.
Traditionally the book-blocks due for Hard or Soft Cover binding with the spine glued or unglued were hammered at the spine with a wooden mallet. This process could never assure uniform thickness of the spine, which adversely effects the Binding and finish of the books. SIKANDAR Book Nipping Presses carry out the above function effectively and efficiently.
Nipping results are best achieved if the signatures (soon after folding) are pressed in the SIKANDAR Bundling Press.
Excessive swell is reduced by clamping the book-block, the spine is pressed hydraulically to a set pressure (adjustable to suit the paper in use) and duration of stroke/s controlled with the help of PLC (Programmable Logic Control) set for the desired size.
Once the required parameters are set For a given lot of book-blocks, all books of the same lot will have uniform spine thickness.
Hourly production of 700/800 books with a single block of 300 mm spine thickness can be achieved on an average.
Operating features are options for Manual, Multi or Single Stroke, Book-Blocks processed counter, Emergency Stop & recycle push buttons

TECHNICAL SPECIFICATION

MODEL	UNIT	SMNP31	SMNP41	SMNP52
Book Width	mm	310	410	520
Book Spine ( Min-Max)	mm	10-100	10-100	10-100
System Clamp Pressure	Kgs	4000	4000	6000
Nipping Pressure(Adjustable)	Kgs	2500	2500	4000
Electrical Load/Motor400/440 V AC 50 Hz 3 Phase	Kva/H.P.	1.5/2	2.25/3	2.25/3
Hydraulic Oil capacity	Ltrs	80	95	115
Overall Dimensions (WxDxH)	Cms	63x119x94	73x119x94	85x119x96
Net Weight(Approx.)	Kgs.	450	500	600

Other Products in 'Hydraulic Book Press' category

Exercise Notebook Spine Flatten Edge Squaring

<< Back